搜索

电源芯片

您现在的位置：首页 > 产品中心 > 电源芯片 > CD/DC电源降压/升压IC

TD1742A 40Vin 2 Outputs COT Buck Controller

The TD1742A is a dual, constant on-time (COT) mode
synchronous buck controller. Each channel has both high-side
and low-side drivers allowing synchronous configuration
using two external power-NMOS. It can operate in both
Constant Current (CC) and Constant Voltage (CV) modes. It
enables system designers to complete the suite of various
end equipment’s power bus regulators with a cost effective,
low component count, and low standby current solution. The
main control loops of the TD1742A use the cot mode control
which provides a very fast transient response with no
external compensation components. The constant on-time
control supports seamless transition between PWM（ pulse
width modulation mode at higher load conditions and PFM
（ Pulse Frequency Modulation） operation at light loads. The
PFM operation allows the TD1742A to maintain high
efficiency during lighter load conditions. The device provides
convenient and efficient operation with input voltages from
7.5V to 40V.

Features
⚫ Vin: 7.5V to 40V
⚫ CC/CV Mode Control
⚫ PFM Mode for Increased Light Load Efficiency
⚫ Hiccup mode 1-2S when SCP/OVP occur
⚫ Protection
Output short protection: reduce input current to
less than 20mA(RMS)
OVP(output Over-Voltage Protection)
Output FB short protection
Temperature shut down(OTP).
⚫ Adjustable Output Cable Resistance Compensation
⚫ Duty: 0~98%(Toff_min=100ns, Deadtime=25~35ns)
⚫ Switching Frequency: 150KHz(+/-25k)
⚫ Integrated MOSFET Driver.
⚫ OVP: When Vfb>140%*VREF, open discharge
switch (Vout1/2). Discharge current> 50mA
⚫ QFN-16 Package
Applications
⚫ Car Charger
⚫ PD adapter
⚫ High-Brightness Lighting
⚫ General-Purpose DC/DC Controller