产品中心
ZD25WD20BKIGR 2Mb
The ZD25LD20B is a serial interface Flash memory device designed for use in a wide variety of high-volume
consumer based applications in which program code is shadowed from Flash memory into embedded or
external RAM for execution. The flexible erase architecture of the device, with its page erase granularity it is
ideal for data storage as well, eliminating the need for additional data storage devices. The erase block sizes of the device have been optimized to meet the needs of today's code and data storage
applications. By optimizing the size of the erase blocks, the memory space can be used much more efficiently. Because certain code modules and data storage segments must reside by themselves in their own erase
regions, the wasted and unused memory space that occurs with large sectored and large block erase Flash
memory devices can be greatly reduced. This increased memory space efficiency allows additional code
routines and data storage segments to be added while still m
Overview
1.1.General
Single 1.65V to 2.0Vsupply
-1.65V-2.0V for Read, Erase and Program Operations
Industrial Temperature Range -40C to 85C
Serial Peripheral Interface (SPI) Compatible:
-Mode 0 and Mode 3
Single and Dual IO mode
-2M x 1 bit
-1M x 2bits
Flexible Architecture for Code and Data Storage
-Uniform 256-byte
PageProgram
-Uniform 256-byte
Page Erase
-Uniform 4K-byte
Sector Erase
-Uniform 32K/64K-byte Block Erase
-Full Chip Erase
1.2.Performance
Fast read
-2 I/O
104MHz with 4 dummy cycles,equivalent to 208M
-1 I/O
104MHz with 8 dummy cycles
Fast Program and Erase Speed
-1.3ms Page program time
-10ms Page erase time
-10ms 4K-byte sector erasetime
-10ms 32K-byte block erasetime
-10ms 64K-byte block erasetime
Ultra Low Power Consumption
-0.1uA Deep Power Down current
-9uA Standby current
-0.6mA Active Read current at 33MHz
-1.5mA Active Program or Erase current
High Reliability
-100,000 Program / Erase Cycles
-20-year Data Retention
1.3.Software features
One Time Programmable (OTP) Security Register
-3*512-Byte Security Registers With OTP Lock
Software Protection Mode
-TheBlockProtect(BP4,BP3,BP2,BP1,andBP0)bits definethesection ofthememoryarray that canbe
read but not change.
128 bit unique ID for each device
Program/Erase Suspend and Program/Erase Resume
JEDEC Standard Manufacturer and Device ID Read Methodology
1.4.Hardware features
Hardware Protection Mode
-Hardware Controlled Locking of Protected Sectors by WP Pin
Industry Standard Green Package Options
-8-PACKAGE SOP(150mil/208mil)
-8-PACKAGE USON (3x2x0.55mm)
-8-PACKAGE USON (3x2x0.50mm)
-8-PACKAGE USON (1.5x1.5x0.45mm)