搜索

存储芯片

ZDEMMC16GA 16 GB

General Description
Zetta e•MMC is an embedded storage solution designed in a BGA package form. The operation of e•MMC is a simple read
and write to memory using e•MMC protocol v5.1 which is an industry standard.
The e•MMC consists of NAND flash and a MMC controller. 3.3V supply voltage is required for the NAND area (VCC)，
whereas 1.8V or 3.3V dual supply voltage (VCC or VCCQ) is supported for MMC controller.
There are several advantages of e•MMC. It is easy to be used on the standard interface, which allows the easy and widely
used integration with general CPU. Any revision or amendment of NAND is invisible to the host as the embedded e•MMC
controller insulates NAND technology from the host. It means that the host can support the newest processing flash without
updating its hardware or software.
Zetta e•MMC has high performance at a competitive-cost, high quality and low power consumption. e•MMC provides
capacities from 4GB to 64GB.

e•MMC v5.1 compatible. Detail description is referenced by JEDEC Standard
- (Backward compatible to e•MMC v4.5 to v5.0)
Bus mode
- Data bus width: 1bit(default), 4bit and 8bit
- Data transfer rate: up to 400MB/s (HS400) @ 200MHz DDR with 8bit bus width
- MMC I/F Clock Frequency: 0~200MHz
- MMC I/F Boot Frequency: 0~52MHz
Operating Voltage Range
- VCC (NAND/Core): 2.7V ~ 3.6V
- VCCQ (CTRL/IO): 1.7V ~ 1.95V / 2.7V ~ 3.6V
Temperature
- Commerical ( -25℃ ~ 85℃ )

Supports Features
- HS400, HS200, DDR52, SDR52
- High Priority Interrupt (HPI)
- Background Operation, BKOPS Control
- Packed CMD, Command Queuing
- Cache, Cache Flushing Report, Cache Barrier (Optional)
- Partitioning, Partition types, RPMB, RPMB Throughput Improve
- Discard, Trim, Erase, Sanitize
- Write Protect, Secure Write Protection (Optional)
- Lock/Unlock
- Power Off Notification(PON), Sleep/Awake
- Enhance Reliable Write
- Boot feature, Boot partition
- Context IDs, Data Tag, Real Time Clock
- HW/SW Reset
- Configurable driver strength
- Field Firmware Update
- Secure Removal Type (Optional)
- Device Health Report (Optional)
- Production State Awareness (Optional)
- Data Strobe pin, Enhanced Strobe (Optional)
(Bold features are added in eMMC5.1)